16
Adjustment Pins
Front Gate:
Push this side
up towards tire.
4. Push the front side of cradle until it is touching the tire and reinstall the pins. If pins
cannot be installed while the front side is touching the tire, move the front side of
cradle away from the tire until the pin can be inserted into the next closest hole. You
do not want this to be too tight on the tire.
Do not force the adjustment pins in.
5. Release the latch using the radio and back the tug out from under the plane. Drive the
tug back under the tire to check that the wheel cradle is set up correctly and to ensure
the cradle is latching securely. When releasing the latch always make sure the wheel
is against the back gate. If not, the latch may not release properly.
