ABYSS BATTERY PAB9000 User Manual Download Page 2

Instructions: 

Method of connecting battery and electric reel 
directly 

Method one:

 After installing the battery into the

protective cover, fix on the fishing rod, then
electric reel relates to the power cord.

Method two:

 The battery is directly connected to

the electric reel.

Above two methods: Tighten the lock-nut to fix

as follow picture

)。

w

Do not rotate the battery.
The position of the battery and the pole stand:
The battery must not interfere with the fishing
rod and the boat's edge.

 

Attention

 

DO NOT

 Leave the battery

 

connected while underway.

 

   

Attention 

Do NOT

 put too

much pressure on the battery. 

 

Attention 

Do Not

 operate 

beyond 

intended specifications.

After using battery, please fasten the electrode 
protection cover,

if there is any moisture

 please dry 

it before buckling

 and storing the battery.

Safety Instructions

:

To use safely and avoid hazards, please follow the 
instructions and warning labels. 

Battery Safety Instructions:

WARNINGS

w

Don’t use the battery under 

a hot,

hyperbaric, or sealed 

environment. Don’t

 put

the battery in fire or water.

w

Don’t break,

 heat, decompose or modify the

battery.

w

Please avoid the direct sunlight and do not
put the battery in the car.

w

When use the battery, please keep the
temperature at-20

60

.

w

Please use the designated charger and
comply with the charging manual.

w

Don’t apply for other items except electric

reel. 

It’s specifically designed for fishing reels

w

Please avoid the battery from impacting
strongly or dropping from heights.

w

Cell damage, liquid flow, pleases take
precautions. If the battery fluid contaminates
the skin, please immediately wash with
water. If it results in cystitis, please go to the
hospital immediately.

w

If you plan on storing the battery for a long
period of tim, please keep at temperature
at-20

25

 dry and in corrosive free

environment.

PAB9000 Characteristics: 

The battery shell is made of high-strength, high-
toughness, and impact-resistant ABS material
(class VO).

The battery protection system has overcharge,
over discharge, overcurrent, short circuit,
temperature protection, undervoltage lockout
load, charge balance function, which can extend
battery life.

When the electric wheel is overloaded, the
safety protection function of the battery will be
activated, and the power supply will be
temporarily stopped. If the battery is
disconnected and reconnected, it will
automatically recover.

Under normal use, when the battery is
recharged 500 times, the discharge capacity is

≥80% of the initial capacity.

Battery life: Under normal use, after more than
1,000 cycles of charging and discharging, the
battery may not be able to

 charge or the power

Summary of Contents for PAB9000

Page 1: ...he electrode notch of the charger plug insert it to the bottom and tighten the locknut Plug the charger power cord into the charger Insert the charger power cord plug into AC100 220V socket The charger indicator turns red and charging starts Be sure to follow the above steps to charge the battery Power light Implication Red light on Charging Green light on Fully charged Red light flashing Abnormal...

Page 2: ...e keep the temperature at 20 60 w Please use the designated charger and comply with the charging manual w Don t apply for other items except electric reel It s specifically designed for fishing reels w Please avoid the battery from impacting strongly or dropping from heights w Cell damage liquid flow pleases take precautions If the battery fluid contaminates the skin please immediately wash with w...

Page 3: ...ery except the electrode part with a clean towel dampened with clean water 2 When cleaning the dirt of the electrode please be careful not to damage the protective film of the electrode surface Fault Judgment Situation Fault confirmation and handling method Battery Heat Charging and discharging heat is normal If the battery is too hot to touch the battery may be abnormal Stop using it immediately ...

Page 4: ...9000 200 mAh 0 2C 25 Dimension 51mm length 51mm width 192 mm height Weight about730g Charger Input Parameter AC100 240V 50 60HZ Output Parameter DC16 8V 4A 3A Charging Time About 2 7 hours about3 6 hours Red light on charging Green light on full charge Charging temperature at 0 45 ...

Reviews: