ABYSS BATTERY 24V10A User Manual Download Page 8

Lithium Battery Charger User Manual

1. MATCHING THE CHARGER WITH “AC POWER GRID”

AND THE “BATTERY PACK”

Match for chargers and AC power grid:

 Before using the charger, please make sure the AC power grid 

voltage and its frequency are in the range specified in the "Basic Parameters" label. If the voltage is below the 
nominal input voltage, the charger will reduce the charging current or shut down for protection (AC voltage 
is less than 90V), and it will affect battery charging performance.

Match for the charger and battery pack:

 There is applied battery specification in the "Basic Parameters" 

label on the charger side. Please confirm whether battery type (flooded lead-acid batteries, sealed 
maintenance-free batteries, lithium batteries, nickel-metal hydride batteries, nickel-cadmium batteries, etc), 
the battery capacity (AH), and battery pack rated voltage (V)match those on the "Basic Parameters" label. If 
they do not match, it is likely to cause less charge or overcharge and even cause permanent damage to the 
battery pack, bringing serious economic losses.

2. AC POWER WIRE, DC CHARGING CABLE POLARITY,

AND PRECAUTIONS

AC input wire is at the rear of the charger: 

I, N, and Earth are, marked on the input line plug. Please 

distinguish correctly. I, N, earth on AC plug should correspond with those of socket outlet. the Earth wire of 
the AC input socket should be connected firmly to the ground, otherwise, the shell leaks electricity or 
electrostatic and easily causes injury.

The charging output line is in front of the charger: 

You can distinguish the positive and negative of the 

output line by colors. Red or Brown line is to connect battery "+" and Blue or Black to battery "-"(except for 
special requirements of customers). The special connection of charging polarity with batteries polarity 
depends on special charging plugs, sockets, and user special requirements. The
polarity of the charging socket should be consistent with the polarity of the charging plug polarity, otherwise, 
it cannot charge. Please check before using.

8

OPERATION METHOD:

WWW.ABYSSBATTERY.COM

Summary of Contents for 24V10A















Reviews: