ABX Pentra 80 RAB108EA, User Manual

Page: 82 / 306

Pentra 80
3–26
Pentra 80 - User Manual - RAB108EA
▼ Calibration Key
Tab. 3–4: Calibration Grid Keys
If the Calibrator lot is different than the current calibrator material being used for calibra-
tion, proceed with the following as described in
4.2. Target values, page 3-26.
4.2. Target values
From the Calibration grid, select the «Target» key (see Tab. 3–4: Calibration Grid Keys, page
3-26) to open the «Calibration Target» screen for editing.
Fig. 3–24 Editing the target values
Select the «Edit» key to edit the target fields.
Read the barcode label on the calibrator with the external Barcode Reader or type in all the
calibrator information using the calibrator Assay sheet that comes with the calibrator kit.
Once all entries have been made, select the «OK» key to save the information
Key Name Function
Automatic Calculation
Runs an automatic calculation of the new
coefficients (see
4.3.1. Calibration
passed, page 3-28). This key is enabled
only if a minimum of 5 runs on calibrator
has been performed
Target
Access to the Target values window
(see
4.2. Target values, page 3-26)