ABX Pentra 80 RAB108BA, User Manual, Page: 66 / 306

Pentra 80
3–10
Pentra 80 - User Manual - RAB108EA
1.5.3. Deleting results
▼
Graphics screen
You can only delete the last QC result from the «Graphics» screen.
Select the «Delete» key (see Fig. 3–5, page 3-8), using the «Delete» key.
▼ QC Data Grid
Multiple results can be selected and deleted from the «QC Data Grid». Once the grid has been
opened, the «Delete» window becomes available (see
Fig. 3–7, page 3-10)
Fig. 3–7 QC delete options
1.6. New blood control setup
It is most necessary to enter all required information related to a new lot of control blood
before any QC analysis can take place on such a lot. Target values, Parameter ranges, Alarm
levels, 5DIFF Matrix thresholds, and other control blood characteristics should be entered pri-
or to the analysis of the new lot.
▼ Selection of a control #
Select the «Target» key (see Tab. 3–1: Quality Control Keys, page 3-5) in order to open the
«Target modify» window.
Scroll through the «Control name» list and select the control # you would like to modify (From
1 to 12 reserved to CBC control, from 13 to 24 reserved to DIFF).
If you need to modify the target values or lot #, proceed as described in Target initialization
by floppy, page 3-10, or in Manual target value entry, page 3-11.
▼ Target initialization by floppy
Each order of Blood controls (ABX DIFFTROL) comes with a floppy disk so that the operator
can insert the disk and update the new control lots without any manual entry of data. Lot #,
Target values and Ranges, Alarms and Thresholds, and Expiration Date are included on the
floppy disk for each level of control.
Select the «Target» key (see Tab. 3–1: Quality Control Keys, page 3-5) in order to open the
«Target modify» window.