110
English
IP Notification
The “IP Notification” function can be used to send information on network settings to an e-mail address.
IP Notification:
Activates or deactivates the function.
Notify type:
Select the area for which information should be given here.
SMTP server name:
Enter the SMTP server name of the e-mail sender here (e.g. smtp.web.de). The
maximum length is 64 characters.
SMTP server port:
The default SMTP server port is 80. An alternative port can be specified here, if
required.
SSL:
If the e-mail server uses SSL, then this can be activated here.
Authentication:
Specify the authentication type for the e-mail account here.
SMTP:
If authentication is made using a user name and password on the e-mail server,
then this option must be activated.
POP before SMTP:
Select this option if the send/receive e-mail function is required before e-mails are
sent. It may be possible to delete “POP before SMTP” in the e-mail account
settings.
POP server name:
Enter the POP server name of the e-mail sender here (e.g. pop.web.de). This option
is only available when “POP before SMTP” is active. The maximum length is 64
characters.
User name:
User name of the e-mail account.
Password:
Password of the e-mail account.
Recipient e-Mail address:
The e-mail address of the recipient. The maximum length is 64 characters.
Administrator e-Mail address:
The address of the e-mail account. The maximum length is 64 characters.
Subject:
Enter a subject here (max. 64 characters).
Message:
The message must not exceed 384 characters.
Tags can be used to integrate specific camera information into the
message.
Placeholder Description
<ip> IP
address
<port>
HTTP port number
<mac>
Device (MAC) address
<product> Product
name
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.