109
English
The settings can be tested using the “Test” button. Accept the settings by
pressing “OK” or cancel them by pressing “Cancel”.
Alarm sending
Alarm sending:
Activates or deactivates the transmission of image data to an FTP server.
Remote path:
This is the file folder where the images are saved on the FTP server. The
maximum length is 64 characters.
Image file name:
Specify the file name for the image/video file here.
Suffix:
Select the file suffix here. This can be the date and time or a sequence
number.
Delete sequence number:
Resets the sequence number to 1.
Alarm:
In the event of an alarm, certain reactions can be configured for FTP
transmission here. A button for configuring the corresponding alarm detector is
available for each entry (if configuration of the detector or trigger is possible).
Effective Period:
Always:
The detectors for these alarms are permanently activated.
Schedule:
The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule” section).
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
