5
Installation (System overview)
Wire the main monitor to channel 1 (CH1) on the Video / Audio Distributor. You can
connect up to 5 more monitors to the Video / Audio Distributor. Wire each monitor to
channels 2 to 6 (CH2 - CH6). The Video / Audio Distributor TVHS10010 can be
supplied with power with the attached power supply (24V DC).
Door station
Connect the 2-wire cable at the door station to the contacts "PLC". The system can
only contain
one
door station.
Note:
The polarity at the different channels CH1-CH9 does not have to be
considered. Door station and monitors have no polarity marking. No special
sequence must be observed on the channels, each channel can operate any type of
device (door station, main and additional monitor).
An electric door opener is connected to the door station at "Door". In the door station
there is a potential-free relay. This has the contacts "NC" (Normally closed, =>
Normally closed contact) and "NO" (Normally open => Normally open contact)
The connections "IO1" and "IO2" are not needed.
2-wire cable
2-wire cable
Monitor
Door station
Video / Audi Distributor
Network cable
IP Camera
