9
English
B
Press the Network-button 3 times within 1.5
seconds and the Status-LED will flash 3 times
If the Remove device process is successful,
the Status-LED flash 6 times.
Repeat the inclusion process from step B if it
was not successful.
4.3. Reset (Factory-Reset)
Press the Network-button for 10 seconds to
factory reset the device
Note:
1, This procedure should only be used if the
primary gateway is not capable of acting.
2, If the multi-sensor is set to the factory
setting, the status is set to "not included", the
association
settings
and
possible
configurations are reset to default.
4.4 Important Note
Once the device is added to a Z-Wave gateway, the alarm can be released and
terminated In Event of an Alarm the high-volume siren (95dB) will sound and LED
strobe lights up.
In Event of main power loss, the Siren can even operate up to 5 minutes in Alarm-
case by the integrated backup-battery. (or 4 hours standby operation)
