Abus PPIC42520B, Instruction Manual

Page: 39 / 58

39
English
5.9.5. Security settings
Security settings Make the security settings for your
camera here.
The changes in the settings are only
applied after exiting the menu.
Reset security code The security code is used to set up the
camera in the app.
During installation, replace the default
security code with one of your own
choosing.
If you have forgotten your security code,
you can reset the camera by pressing the
reset button for approx. 3 seconds and
assign a new security code.
After resetting, remove the camera from
App2Cam Plus and start setting it up using
the setup wizard.
The default security code is "123456".
Attention:
All settings including the network
connection are lost.
Change admin password The admin password grants access to the
advanced settings and enables / disables
the camera recordings.
During installation, you assign your own
admin password.
If you have forgotten your admin
password, you can reset the camera by
pressing the reset button for approx. 3
seconds.
The default admin password is "123456".
Attention:
All settings including the network
connection are lost.