25
English
4.6.3. Stream indicators
CIF
VGA
HD
Full HD
Display of the resolution of the current stream
Directly
Relay server
Display of the current connection status
Direct:
The Peer2Peer server was able to establish a direct connection between your
terminal and the camera.
Relay server*:
The Peer2Peer server could not establish a direct connection. The video data
is stored on the relay server for a short time so that your end device can obtain
the data from the server. This causes a delay of the stream.
Low
Normal
Good
Display of the current assessment of the connection
This represents the connection between the base station and the router.
xxx KB/s
Display of the currently consumed kilobit per second
Note
If the connection to your camera is always made via the relay server, please check the
following settings:
•
Check if UPnP is enabled in your router
•
Check if a hardware firewall or a software firewall denies a direct connection
•
Check whether multiple "hops" (routers) are installed between the terminal device
and the Internet.
