3
German
Important Safety Instructions
The installation of the device is a work on the mains voltage. It must therefore be
carried out by a specialist in accordance with the usual installation regulations and
connection conditions in the country concerned.
Ensure that the circuit is protected by a 16 amp circuit breaker or a suitable equivalent
fuse.
If you are not yet familiar with the installation and operation of the device, for your own
safety it is essential that you read the complete operating instructions first.
During installation, the electrical cable to be connected must be free of voltage. The
first thing to do is to switch off the current at the fuse box and check that there is no
voltage with a voltage tester.
Appropriate use
Use the device exclusively for the purpose for which it was built and designed! Any other use is
considered as not intended!
The product is designed exclusively for installation in a flush-mounted box indoors.
Damage caused by disregarding these safety instructions invalidates the warranty. We assume
no liability for consequential damages!
Unpacking
While unpacking the device, handle it with extreme care. Packaging and packaging aids are recyclable
and should always be sent for recycling.
If the original packaging is damaged, first check the device. If the device is damaged, return it
with the packaging and inform the delivery service.
Please ensure that the packaging contains the DSK (Device Specific Key) card.
This card shows the DSK of your ABUS Z-Wave device. Please keep them in a safe
place. Every S2 (Security 2) certified Z-Wave controller requires the DSK include
(teach-in) the device.
Installation site Operating environment
Do not place any heavy objects on the unit. The device is only designed for operation in rooms with
appropriate temperature or humidity (e.g. bathrooms) or excessive dust. For an exact specification
check the technical data of the individual devices. Ensure that there is always adequate ventilation, no
direct heat sources are applied to the device, no direct sunlight or strong artificial light is applied to
indoor equipment, the device is not in the immediate vicinity of magnetic fields (e.g. loudspeakers), no
open fire sources (e.g. Burning candles) on or next to the unit, contact with splashing and dripping water
on indoor units and aggressive liquids is avoided, the unit is not operated near water, in particular, the
unit must never be submerged (do not place objects filled with liquids, e.g. vases or drinks on or next
to the unit), no foreign objects may enter the unit, the unit is not exposed to strong temperature
fluctuations, as otherwise air humidity may condense and lead to electrical short circuits, the unit is not
exposed to excessive shocks and vibrations.
