11
English
2.3. Exclusion / teach-out device
Activate the exclusion mode (learn mode) on the Z-
Wave controller. (for more details, please refer to the
Z-Wave controller's user manual)
Or press the "
-
" button (Remove / Exclusion) in your Z-
Wave app and follow the instructions to set the Z-Wave
controller to Exclusion mode.
Press the Link button 3 times quickly (within 1.5
seconds) to start the exclusion on the device.
The Link LED starts flashing green for up to 60
seconds
The successful exclusion is displayed in the app or on
the Z-Wave controller and the link LED on the device
lights up green.
2.4. Resetting the factory settings
Press and hold the Link button for at least 5 seconds.
The device is now reset to factory settings.
Hint:
Please use this procedure only if the primary network
controller is missing or otherwise not functional.
If the device is set to factory default, the status is set
to "not included" and the association settings and
possible configurations are reset to default.
2.5. System status
Various events can be communicated to the keypad. These events are distinguished by the illumination
of the LEDs and the loudspeaker behaviour.
