11
English
2.3. Exclusion / teach-in device
Activate the exclusion mode (learn mode) on the Z-
Wave controller. (for more details, please refer to the
Z-Wave controller's user manual)
Or press the "
-
" button (Remove / Exclusion) in your Z-
Wave app and follow the instructions to set the Z-Wave
controller to Exclusion mode.
Press the Link button 3 times quickly (within 1.5
seconds) to start the exclusion on the device.
The successful exclusion is displayed in the app or
on the Z-Wave controller
2.4. Reset to factory settings
Press the Link button 3 times quickly (within 1.5
seconds). Press quickly (within 1 second) a fourth time
and hold down the Link Button for at least 5 seconds.
The siren is now reset to factory settings.
Hint:
This procedure should only be used if the primary
network controller is not capable of acting.
If the device is set to factory default, the status is set
to "not included" and the association settings and
possible configurations are reset to default.
