84
7.4.3.3 Port
HTTP port:
the default port for HTTP transmission is 80. If several IP cameras are
located on one subnet, each camera should have its own unique
HTTP port.
RTSP port:
the default port for RTSP transmission is 554. If several IP cameras
are located on one subnet, each camera should have its own unique
RTSP port.
HTTPS port:
The default port for HTTPS transmission is 443. If several IP cameras
are located on one subnet, each camera should have its own unique
HTTPS port.
Server port:
The default port is 8000. If several IP cameras are located on one
subnet, each camera should have its own unique server port.
If the camera is to be accessed via routers (e.g. from the internet to the local network),
port forwarding must be set up for the HTTP, RTSP and server port in the router. If
HTTPS is also being used, port forwarding must be set up for the HTTPS port too.
7.4.3.4 NAT
Enable UPnP:
enables or disables the UPnP function. When the UPnP function is
enabled, the network camera can be found on Windows networks.
UPnP name:
assigning a UPnP name, which the camera uses to appear on the
network via UPnP.
Enable port mapping:
The NAT (Network Address Translation) or port mapping function
automatically sets up port forwarding for access from the Internet
to the camera in the router (if the router supports this).
Mapping type:
Auto: automatic assignment of all ports
Manual:
manual assignment of all ports
