Abus FUBE50061, Installation Instructions And User Manual

Page: 43 / 188

EN 11
8. Programming
The wireless key switch transmits a user code to your Secvest when
operated. In operating modes 1 and 3, the wireless key switch also
transmits the partition numbers. Once your wireless alarm panel has armed
or disarmed itself, your Secvest will then send a message to the wireless
key switch about its current status. This status is then displayed on the
wireless key switch.
To enable the wireless key switch to fulfil these functions, please proceed
as follows:

Program the operating mode

Program the acoustic signals

Program the user code

Program the reception time

Program the partition (for operating mode 1 and 3)

Pair the wireless key switch with your Secvest

Pair the Secvest with the wireless key switch (only for operating
mode 1)
Press the programming button (15) to call up the programming menu. The
programming menu consists of six sub-menus: