28
8. Programming
Press the program button (15) to enter program mode. The program mode
consists of 6 submenus.
1. Operating mode select either
operation as an arming station (FU5140) and
wireless info module (FU8200), or
operation as a 2WAY arming station (FU8110)
(see chapter 8.1.)
2. beep tones
activates/deactivates the signal tones on the
wireless key switch (see section 8.2.).
3. User code
defines the user code (see section 8.3.)
4. time
You can change the reception time of the wireless
key-switch here (see section 8.4.)
5. Partition
defines the partitions that are assigned to the
wireless key switch and for which the user has
authority (see section 8.5.)
(for operating mode 1
only)
6. Learn mode
for training your wireless alarm system to work with
the wireless key switch. This enables you to view
the active or idle state of your wireless alarm
system (see section 8.6.2)
(for operating mode 1
only)
.
Press the program button (15) repeatedly to access the desired submenu.
Program mode is exited at all menu levels after about 2 seconds if the
program button (15) is not pressed.
Activate submenus or learn mode by pressing the program button (15) and
keeping it pressed. This is confirmed by the display of a .
Summary of Contents for FU8165
Page 112: ......
