42
Naming rule of snapshot file
Method With
date
and time
suffix
Sequential Event
FTP Yes
<Prefix>_20050107175903.jpg
<Prefix>_20050107180653_1_pre.jpg
<Prefix>_20050107180654_2_pre.jpg
<Prefix>_20050107180655_3_pre.jpg
<Prefix>_20050107180659_4_trg.jpg
<Prefix>_20050107180700_5_pos.jpg
e)
No
<Prefix>.jpg
<Prefix>_1_pre.jpg
<Prefix>_2_pre.jpg
<Prefix>_3_pre.jpg
<Prefix>_4_trg.jpg
<Prefix>_5_pos.jpg
e)
Email N.A.
<Prefix>.jpg
Example:
Periodic Snapshots
From:
http://192.168.1.53
<Prefix>.jpg: 2005/01/07
17:59:45
Note: Network Camera
<Prefix>_1_pre.jpg
<Prefix>_2_pre.jpg
<Prefix>_3_pre.jpg
<Prefix>_4_trg.jpg
<Prefix>_5_pos.jpg
Example:
Event snapshots: Motion detection
From:
http://192.168.1.53
<Prefix>_1_pre.jpg 2005/01/07 18:09:16
<Prefix>_2_pre.jpg 2005/01/07 18:09:16
<Prefix>_3_pre.jpg 2005/01/07 18:09:16
<Prefix>_4_trg.jpg 2005/01/07 18:09:16
<Prefix>_5_pos.jpg 2005/01/07 18:09:16
Viewing System log
Click on the link on the configuration page to view the system log file. The content of the file provides useful
information about configuration and connections after system boot-up.
Viewing System Parameters
Click on this link on the configuration page to view the entire system’s parameter set. The content is the
same as those in CONFIG.INI.
Factory default
Click on the link on the configuration page to restore factory default settings. Any changes made so far will
be lost and the system will be reset to the initial factory settings. After clicking on the “Restore” button and
make confirmation, the system will restart and require the installer program to set up the network again.
Summary of Contents for DIGI-LAN TV7210
