34
35
4.3
from monitoring
mode
Smartphone with functioning
cMAP App and activated
Bluetooth
®
function in range
(approx. 2-5 m).
Press button on the lock.
(wake-up tone sounds).
With the “Keyless Go”
function in the
app enabled, the lock will open as
soon as the smartphone is within the
immediate vicinity of the lock.
With the “Keyless Go”
function
disarmed, the lock is unlocked by
pressing the corresponding button in
the app.
Attention: For security reasons, it will
be partially unlocked at first. The
respective form factor will only be
unlocked on one side. This provides
convenient property protection and
prevents the lock from accidentally
falling down.
If you would prefer it to fully unlock -
such as to change a form factor - this
must be set up in the app.
Charging the battery
You can view the battery charge sta-
tus on the cMAP App. Charge your lock
as soon as the app prompts you to do
so. If the battery is depleted, you will
be unable to open and close the lock!
Only use the original mains adapter
and the original charging cable to
charge the device.
After charging, remember to properly
close the cap again! The cap seals the
device and protects the electronics
from humidity and dirt.
Please follow the safety instructions
on page 38-42!
5.
Summary of Contents for 9001 IoTect
Page 1: ...1 9001 IoTect ...