Abstrakt Instruments Avalon Reference Manual Download

Page: 28 / 47

AVALON - Reference Manual

7.3.4.5 LAST STEP

To set the last track step press

D.C.

[

TIME

]

When the last track step is set, the

[

TIME LED

]

will light when the last

step is reached. For example, if the last track step is track step 16 the

[

TIME LED

]

will light when

the

NEXT

BACK

button is pressed

and held on track step 16.

7.3.4.6 INSERT & DELETE

To insert a track step press

[

FUNCTION

]

[

INSERT

]

. A new track step

will be inserted at the current location.

To delete a track step press

[

FUNCTION

]

[

DELETE

]

. The current

track step will be deleted and the remaining track steps will move

back

one step.

7.3.4.7 SETTING

D.S.

AND

This feature is not yet implemented as of v1.04 software !

The Avalon uses the musical notation

D.C.

D.S.

, and . The use of

notation saves panel space and is a salute to the original TB-303
control surface.

D.C.

means "from the top". This button is used to

program the track step where you want to loop back to

track step 1

Hence it is used to set the LAST TRACK STEP along with the TIME
button. is the "repeat from" sign, and

D.S.

means "from the sign".

They are used to set cue points to loop a section of a track, so a track
will loop from

D.S.

back to the sign.

To set the

repeat from

sign on a track step press

[

FUNCTION

]

To set

D.S.

on a track step press

[

FUNCTION

]

D.S.

7.4 REALTIME MODE

In REALTIME MODE track steps can be manipulated realtime by
overriding transpose, accent, slide, and mod env. settings.

7.4.1 REALTIME ACCENT & SLIDE

Accent and Slide can be

played

to trigger accents and slides.

To override pattern step data with accents and/or slides, press

[PITCH] + [ACCENT]

[SLIDE]

. For example, to force a pattern to

accent steps press and hold

[PITCH] + [ACCENT]

Accent and Slide can also be

played

realtime to mute accents and

slides.

To override pattern step data and mute accents and/or slides, press

[

FUNCTION

]

[PITCH] + [ACCENT]

[SLIDE]

. For example, to force a

pattern to mute accents press and hold

[

FUNCTION

]

+ [PITCH] +

[ACCENT]

7.4.2 REALTIME MOD ENV

The modulation envelope can be triggered in realtime by pressing

[PITCH] + [ENV]

. Each time the button combination is pressed the

modulation envelope will be triggered.

To mute modulation envelope triggers to prevent it from being
triggered press

[

FUNCTION

]

+ [PITCH] + [ENV]

Summary of Contents for Avalon
















































Search results

Summary of Contents for Avalon

Reviews:

Related manuals for Avalon

Brands by name

Popular brands

Abstrakt Instruments Avalon, Reference Manual

Search results

Summary of Contents for Avalon

Reviews:

Related manuals for Avalon

Brands by name

Popular brands