ABSTRACTA Plenty Pod Medium, Installation Instructions Manual

Page: 10 / 29

Loosen the set screw in the frame profile (Fig A) until the
hammerhead bolt (Fig B) at the end of the profile can be turned
and fit into the middle track of the vertical profile (Fig C).
When the hammerhead bolt is inserted into the track, place the
profile on the floor (Fig D). Then tighten the set screw until the
profile is fixed to the vertical frame (Fig E).
The edge of the profile should align with the outer edge of the
floor. Repeat with the profile on the opposite side.
Fig A Fig B Fig C
Fig D Fig E