Page 7
You can tell which unit is the Master unit because its green light will be flashing
in time with the music. The green light will be permanently lit on all the slave
units.
Note: If you connect other manufacturers’ products to the DMX line
while using stand alone mode, they will probably not respond.
Remote control for Futurescan 1, Gladiator Revolution and Colourflood: Connect
the remote control to the first unit in the DMX line using a stereo jack cable.
Not all units are fitted with the remote control socket, so ensure a “master”
unit fitted with the socket is first in the DMX line. The remote will then control
all the other lights in the DMX line. If the unit with the remote is not first in the
DMX line, the remote will be ignored.
Light show variations
To improve the light show, you can set Dipswitch 10 to “ON” on some units.
This will make the unit do a variation on the lightshow (like inverting the
movement or using a different colour). Units with Dipswitch 10 “OFF” will
follow the Master unit.
If you’ve got four units, you might want to set Dipswitch 10 “ON” on the
outside two units and “OFF” on the middle two, to create an exciting varied
lightshow. Even with only two units, setting Dipswitch 10 “ON” on the Slave
unit will make for a better lightshow.
On
units with Advanced Sound Response (ASR), if you set dip switch 10
“ON” on the Master unit, no blackouts will be used in the lightshow. This is
useful if you are using a single unit. On units with “Supersound,” the Master unit
does not take any notice of Dipswitch 10. It always behaves as if the switch is
OFF.
If you’ve got a variety of different Abstract products, they might have different
versions of the light show programmed into them - we are continually
improving the light show. If you have any units with ASR, make sure one of
those is the Master unit.
Summary of Contents for ClubColour
Page 1: ...Instruction Manual ...
Page 2: ...Page 2 ...
