_____________________________________________________________________________________________________________________
Absolute Measurement Ltd. (T/A CMC Controls)
t: (0) 1732 763278
| e:
| w: absolutemeasurement.co.uk
Unit 19
| Silver Birches Business Park | Aston Road | Bromsgrove | B60 3EU
3
Transducer Instruction Manual
Range:
LETIX
Type:
L-ANV-0-0-R-AC
Revision:
V1.0
2.
Installation
2.1
Mechanical
The installation of this unit
MUST
be carried out by a competent person who has the relevant knowledge
and ability to install the unit in a safe manner, The installation is not the responsibility of CMC Controls or
Absolute Measurement Ltd.
The Indicator must be installed in a dry, non-hazardous location. A panel cut out of 92 mm (+1.0/0.0 mm)
x 45 mm (+1.0/0.0 mm) is required. The depth of the Indicator is 125 mm but extra provision must be
allowed for cable connections. A single fixing clip, behind the unit, retains the Indicator. To install, simply
insert the Indicator into the cut out and fit the clip to hold the Indicator in place.
The tension transducers must be installed in accordance with the installation procedure from the
transducer handbook. See the transducer part of the handbook or a specific drawing for the connection
details and wire colours.
2.2
Unit Electrical Connection Diagram
1
2
3
4
5
6
7
8
9
10
11
12 13
19
14 15
16 17 18
ANALOG
O/P OPTION
-
+
SERIAL DATA
O/P OPTION
SIGNAL I/P & EXCITATION
LOGIC INPUTS
POWER
SEN-
SIG-
EXC-
SIG+
SEN+ EXC+
ALA
RM
LOCK
CALI
B'n
LO
CK
N
L
-
+
LETIX Connection Diagram
Not
Used
