Absolute Acoustics NDS-UHM Series, Install Manual

Page: 19 / 30

NDS-UHM
Signal
Ground
12V
IR CTRL port of UHM matrix switchers can be used for device control. A list of
available features, and their respective codes are available on the Absolute
Acoustics website. The connection cable between the unit and the IR emitter
equipment must be assembled with the following con guration:
IR Input ports of UHM matrix switchers can be used for signal extension, carrying
the input signal to the matching output port on remote HDBaseT™ receiver. The
connection cable between unit and the IR emitter equipment must be assembled
with the following con guration:
The RS232 control port can be used for device control. A list of available features,
and their respective codes are available in the Absolute Acoustics website. The
connection cable between the unit and the controller must be assembled with the
following con guration:
Cont rol Port s Co nfi g urat io n
GND RX TX
The zone output RS232 extension ports can be used for control extension, carrying
the control signal to the matching output port on remote HDBaseT™ receiver. The
connection cable between unit and the controller must be assembled with the
following con guration:
GND RX TX
IR ( DEVICE CONTROL)
IR ( ZONE EXTENSION)
Signal
Ground
RS232 ( DEVICE CONTROL)
RS232 ( ZONE EXTENSION)