3
1
5
6
2
Air
flo
w
Type
Ar
t No
.
S3B1/595
92110603
4
Air
flo
w
Type
Ar
t No
.
S3B1/595
92110603
3
1
5
7
2
4
6
Subject to alteration without prior notice.
5
US_CA/ A•mist_10C/UM2239-1
1. Inlet, pipe connection
2. Return oil pipe
3. Filter stage 1
4. Fan
5. Electrical manometer (in the door)
6. Outlet
5.1 FUNCTION A•mist
10C
Contaminated air is sucked into the inlet on the
side of the assembled unit. For this version of the
A•mist
10C
unit, the filtering process occurs in one
stage only. There are different filter cassettes to suit
different applications available. Depending on the
type of the chosen cassette, the constant collecting
efficiency varies from 83 up to 93%. Thanks to the
continuous draining of the filter cassette, the unit
can be operated without interruption 24-7. The
returned oil is collected at the bottom of the filter
for recycling.
The air is then extracted through the fan, after
which it is usually clean enough to be returned
directly to the premises.
An electronic manometer indicates when the filter
cassette needs to be washed or replaced. A signal
from the electronic manometer can also be transfe-
rred from the unit to somewhere externally.
5.2 FUNCTION A•mist
10C
WITH HEPA
Contaminated air is sucked into the inlet on the
side of the assembled unit. For this version of the
A•mist
10C
unit, the filtering process occurs in two
stages. Thanks to the continuous draining of the
Absolent filter cassettes, the unit can be operated
without interruption 24-7. The returned oil is col-
lected at the bottom of the filter for recycling.
The air is then extracted through the fan, after
which it is filtered once more in an HEPA H13 cas-
sette. The HEPA cassette offers a guaranteed and
consistent collecting efficiency of 99.99% arresting
mpps (most penetrating particles approx. 0.14 µm.
The air is now usually clean enough to be returned
directly to the premises.
An electronic manometer indicates when the filter
cassette needs to be washed or replaced. A signal
from the electronic manometer can also be transfe-
rred from the unit to somewhere externally.
1. Inlet, pipe connection
2. Return oil pipe
3. Filter stage 1
4. Fan
5. Electrical manometer (in the door)
6. HEPA H13 cassette
7. Outlet
OPERATION / DESIGN
5
