Absima HOT SHOT AB2.8 BL, Manual

Page: 8 / 38

Basic information for a safety operation of a rc model
car.
Dear customer,
thank you that you have chosen a high-performance product from Absima / Team C.
Our products have been designed for beginners, hobby pilots and competition ambitious
drivers. Absima / Team C wants you to have fun and success with your new model and
we therefore recommend that you read the following points carefully.
Before each driving:
•
Please check all screws are properly fitting.
•
For screws which abut on metal, you should check whether there is enough
security screws paint.
•
The servo saver should always be set so that it works smoothly and is not too
tight otherwise the servo gets damaged.
•
Check on your remote control and the vehicle the batteries whether these are still
fully charged.
•
Check on your remote control, the TRIM settings that the wheels are straight and
that you have enough steering angle.
After each driving:
•
If you have driven in dirty terrain, it is advisable to clean the completely car.
•
If you are driving through rain or water you have to dry the entire vehicle,
otherwise all metal parts will rust. To displace moisture is
WD40 just right.
•
After several trips we recommend that you check the bearings if they are still
functioning properly.
•
After several trips we recommend that you check out the differentials in the
vehicle.
•
General visual check after every ride