17
KL II
Series User Manual
Step 2:
Install the adjacent cabinets on the left and right
one by one, and fix them with M6x30m bolts
between the left and right sides, and then tighten
them with a socket hexagon wrench;
Note: During the installation process, ensure the
flatness of the splicing of the cabinet structure.
Step 3:
Place the connecting plate behind the square
tube, insert the M8*10mm bolt from the
connecting plate hole and lock it to the installation
hole of the cabinet, and then use a spanner to fix
the bolt tightly.
Note: In the process of tightening the bolts,
confirm the flatness of the structure splicing from
the front.
Step 4:
Install the second layer, fix LED cabinets with
M6x30mm bolts between top and bottom, and
then tighten them with a socket hexagon wrench;
Note: During the installation process, ensure the
flatness of the splicing of the cabinet frames
Step 5:
Follow the above steps to complete the
installation of all cabinet frames
Step 6: Install the cabinet power cord and network
cable and ensure that they are correct, then install
the LED modules
Rear installation：
step 1:
Take out the KL II cabinet frames from
the package and install the first layer at
the bottom.
Install the adjacent frames on the left and
right one by one, and fix them with
M6x30m bolts between the left and right
sides, and then tighten them with a
socket hexagon wrench;
