Absco Industries
Assembly Instruction Manual
ABSCO POOL PUMP COVER
MODEL: PPCK-PTX
5’ W x 5’ D x 4’ 10” H
Model: PPCK-PTX
1.0
11
27/4/23
LEFT PANEL ASSEMBLY
PPG
PPL
2.
Make sure the ends of the
sheets are flush at overlap before
continuing.
Fasten with 3/8” self tapping
screws through prepunched
sheet-to-sheet holes on overlap.
1.
Layout and overlap the two
sheets by one rib as shown.
orientate them so the two rib
holes overlap and angled end of
the sheets are both to the top.
Angled ends to top
3.
Attach the top and bottom
channels using the SNAP-TiTE
method.
Make sure you have the short
side of the channel to the
outside of the sheeting
SNA
PT TE
i
SN
APT T
E
i
81E
81N
FAST001
4.
Fasten the 64C channel to the
underside of the sheeting using
four self tapping screws from
above.
Make sure it is orienated as
shown below.
64C
FAST001
- This completes the left panel -
