Absco Industries
Assembly Instruction Manual
ABSCO UTILITY SHED
MODEL: 3060UTK
3.00mW x 5.96mD x 2.10mH
Model: 3060UTK
29/11/2021
1.3
52
DOOR INSTALLATION
Secure front doors to the front panel in
the same manner as the side door was
fitted.
Fit door braces (99B) to
each door as shown by
fastening at each end then
drilling remaining holes
from the inside face of each
door.
Secure with screws from the
outside face of each door.
FASTEN TO SLAB
DRILL 12mm HOLE
CENTRALLY TO
PICK UP PADBOLT
USE THE 75mm JAMB SECTIONS (93B)
AS PADBOLT SUPPORTS. DRILL AND
SECURE THESE SECTIONS TO THE
TOP AND BOTTOM OF THE DOOR,
THEN FIT PADBOLTS.
99A
93B
