Absco Industries
Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD
25/07/2022
2.1
23
FINAL CONSTRUCTION
Each anchor consists of one nut, bolt, M10
dynabolt and steel angle.
Drill a 10mm hole into the wall sheet.
Drill a 10mm hole into the concrete.
Bolt and Nut*
M10 4.6/S
Steel Angle*
35 x 35 x 3
M10 Dynabolt*
* Denotes hot dip galvanised fi nish
Wall Sheet
Slab
Bend the top and bottom
flanges as shown.
Hook the bottom flanges under
the roof lip flashings and screw
the top flanges as shown at
both ends of the ridge beam.
The holes required to fix the
front edge of roof panel are to
be drilled into the gable pieces.
D
D
D
D
D
D
14A
LOCATION OF 12
CONCRETE ANCHORS
