Absco Industries
Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD-PTX
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD-PTX
12/7/23
2.2
9
Australian Made
REAR PANEL ASSEMBLY
1x required
1.
Overlap specifi ed sheets by a
rib.
Make sure ends are fl ush and
orientated as shown.
2.
Fasten with self tapping
screws through prepunched
sheet-to-sheet holes on overlap.
If you can’t see bottom hole twist
the sheet left or right.
Make a new hole with supplied
drill bit if bottom hole is too far
up or down the sheet or not
found.
3.
Attach the top and bottom
channels using the SNAP-TiTE
method.
Make sure you have the short
side of the channel to the
outside of the sheeting
53C
81F
30A
30G
edge holes to outside
four top holes to outside
FAST001
