ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16
Absco Highlander Shed
Model: 3060HK
INSTRUCTIONS
AND VIDEOS
FASTEN TO SLAB
DRILL 12mm HOLE
CENTRALLY TO
PICK UP PADBOLT
USE THE 75mm JAMB SECTIONS (93B)
AS PADBOLT SUPPORTS. DRILL AND
SECURE THESE SECTIONS TO THE
TOP AND BOTTOM OF THE DOOR,
THEN FIT PADBOLTS.
FIT DOOR BRACES (99B) TO
EACH DOOR AS SHOWN BY
FASTENING AT EACH END,
THEN DRILLING REMAINDER
HOLES FROM THE INSIDE
FACE OF EACH DOOR AND
SECURING WITH SCREWS
FROM THE OUTSIDE FACE OF
EACH DOOR.
- SECURE FRONT DOORS TO THE
FRONT PANEL IN SAME MANNER AS
THE SIDE DOOR WAS FITTED
99A
93B
99B
DOOR INSTALLATION
PAGE 34
