Absco Industries
Assembly Instruction Manual
ABSCO UTILITY SHED
MODEL: 3052UTK
3.00mW x 5.22mD x 2.10mH
Model: 3052UTK
09/07/2019
1.12
16
To make the total span we must now join the two ridge beams
.
Using a hacksaw, remove one protruding section of each
ridge beam, this will allow the sections to butt up neatly
to each other.
Cut away these two only.
Self drilling Tek screw
98A
ZARSP
Tek screw driver bit
Push
.
.
.
98A
Finished
Joined Ridge Beams
Insert the ZARSP at an equal distance
into each ridge beam. Confi rm that
the beam is straight with a string line
before fastening with self drilling
screws.
The ZARSP is a very tight fi t, tap into
place with a hammer.
ZARSP
JOINING RIDGE BEAMS
97A
97A
97B
97B
5215mm Overall length
