PAGE 13
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 15081S 22/10/13
Absco ECO Shed
Model: 15081SECO
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws
NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USED
INSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLY
ENLARGING THE HINGE HOLE SETS IN THE JAMB
USING A 4MM DRILL BIT
91A
91A
B
B
DOOR PANEL ASSEMBLY
