Easy Installation Guide for ABS MegaCam HS421X 6” Outdoor Housing (for 421M/4210 Network Camera)
©1990-2008 ABS Computer Technologies Inc. All Rights Reserved
3
Step 3:
Feed power adaptor and LAN cable through wall mount bracket.
Step 4:
Insert the cables into outdoor housing. The cables should go through the center of the electrical
board.
Step 5:
Fasten the wall mount onto the outdoor housing. Use L-wrench to screw the outdoor housing
tightly.
Step 6:
Use the small screws to secure the outdoor mounting bracket to the bottom side of the IP Network
Camera.