Part number 20078, Rev 0
5
DOOR BINS
(not applicable to all models)
Your unit may come equipped with storage bins in the door. Because of the temperature
characteristics of these units, items stored in these bins may not be maintained in the desired
temperature band. Please restrict the use of these bins for non-critical temperature storage.
Shelf Installation
(not applicable to all models)
Hook shelf clips onto pilaster strips (see Illustration). Position all four shelf clips equal in
distance from the floor for flat shelves. Wire shelves are oriented so that cross support bars are
facing down.
Place shelves on shelf clips making sure all corners are seated properly.
Temperature control
NOTE: The control is preset at the factory to provide the desired air and product
temperatures inside of the unit and requires no further adjustment. Please contact us before
making any adjustments to determine if adjustment is necessary and, if so, to make sure it is
performed properly.
These models utilize a manual thermostat to control the compressor thereby maintaining
temperature. In models ABT-9R, ABT-17R, and ABT-30R, this thermostat is located inside of the
compartment. In models ABT-14R and ABT-20R, it is on a junction box on the back of the
refrigerator. Turning the thermostat towards the higher numbers will make the unit colder.
Lower numbers make it warmer. Turning the thermostat to the off or 0 position will turn the
unit off.