12
1.
Insert two mounting screws in thewall, 3-15/16 inches apart. Allow
about 3/16 of an inch between thewall and screw heads for
mountingthe base station.
2.
Perform steps
1
to
3
of
"StandardWall Plate Mounting"
on page 25.
3.
Plug a telephone cord into the
LINE IN
jack on the base
station.Connect the other end to the wall jack leading to the
Panasonic PBX.
4.
Plug a telephone cord from a Panasonic key telephone into the
LINE OUT
jack on the base station.
5.
Place the telephone cord(s) inside the molded channel(s) on the
bottom of the Wall MountAdapter.
6.
Place the base station on the posts of the wall screws and push
down until firmly seated.
7.
Plug the AC Adapter into a standard 120V AC
wall outlet.
WALL-MOUNTING THE CHARGING UNIT
(OPTIONAL PROCEDURE)
The charging unit is also designed to be wallmounted. Before mounting your
charging unit,consider the following:
•
Select a location away from electrical cables,pipes, or other items behind the
mounting location that could cause a hazard when inserting screws into the wall.
•
Make sure the wall material is capable of supporting the weight of the charging
unit.
•
Use #10 screws with anchoring devices suitable for the wall material at the
mounting point.
1.
Insert two mounting screws 1-9/10 inches
apart. Allow about 3/16 of an inch
between the wall andscrew heads for
mounting the phone.
