DECLARATION OF CONFORMITY
Abrex System Srl, via del Viticolotore, 11, Loc. Poggio
Piccolo, 40023 Castel Guelfo di Bologna (BO), Italy,
declares under its sole responsibility that ViperX
versions 3B are designed and built in compliance
with the following European standards:
Machine Directive 2006/42/CE
UNI EN ISO 5349:2004
UNI EN ISO 11148-8:2012
UNI EN ISO 4414:2012
WARRANTY:
the warranty on ViperX™ tools is for 1 year and is extended
to 2 years if the tool is registered within 30 days of purchase. The warranty
for industrial use is for 1 year. Each tool must be individually registered
on the www.abrex-system-tools.com website. The warranty for ViperX™
tools covers all manufacturing defects and any defective materials
used in the construction of the tool
. For the warranty to be valid,
ViperX™ pneumatic tools must be used and stored in accordance with the
instructions for use in the manual provided in each tool box. The warranty
does not cover
the tool in the following cases:
- Damage due to accidental shocks or falls.
- Transport damage.
- Improper use in unsuitable environments or exposure to extreme
temperatures.
- Sanding of wet materials or in the presence of solvents and/or liquids.
- Damage caused by the use of non-original accessories.
- Damage caused by air flows higher than recommended.
- Failure to lubricate the tool.
- Tool parts subject to wear: bearings, rotors and blades, dust extraction bell,
pad.
- Maintenance performed by third parties and/or centres unauthorized by the
manufacturer.
- Malfunction due to tampering with the tool by the customer and/or third
parties.
Repairs carried out under the warranty do not extend the warranty period.
