5
3
4 1
2
USE:
connect ViperX to the compressed air supply (1)
using an internal Ø8 mm and external Ø10 mm tube.
Connect the Ø 29 mm dust extraction hose to the swiv-
el connector (2). Place ViperX on the surface to be sand-
ed, hold it firmly and press on the start lever (3) with the
palm of the hand to start the pad rotating. The side lever
(4) adjusts the rotation speed (RPM). ViperX stops rotat-
ing when you lift the palm of your hand from the start
lever. To replace the pad, remove the air and extraction
hoses, unscrew the central M8 screw (5), remove the
worn pad, position the new one in place and tighten the
M8 screw.
IMPORTANT: ALWAYS ASSEMBLE ONE OF THE FOUR
PADS (5) BEFORE PUSHING THE START TRIGGER (3)
MAINTENANCE:
periodically lubricate the air and extraction connections
with pneumatic oil (use Orlen Pneumatic VG 32 oil, ISO viscosity grade: 32).
After each use, perform general cleaning and check that the start/stop lever is
working. Do not use liquids such as water or solvents.
If any abnormality is noticed in the rotation (RPM) contact Abrex-System.
DISPOSAL:
separate the components according to type and material. Take
them to authorized disposal facilities.
REPLACEMENT PADS
Pad Model
Screw
thread
Weight
Dimensions
Holes Hardness
Velcro
®
System
Computer Code
MULTISANDER
M 8
830 gr
96x141
mm
25
Medium
●
SVIPER141F1
MULTISANDER
M 8
840 gr
115x100
mm
8
Medium
●
SVIPER100F1
MULTISANDER
M 8
820 gr
80x130
mm
17
Medium
●
SVIPER130F1
MULTISANDER
M 8
826 gr
70x198
mm
19
Medium
●
SVIPER198F1
