Reset to Default
- Press C1 and C11 together for 10 seconds to reset all con
fi
gura
ti
on to default factory
se
tti
ng. The Red LED backlights on all the bu
tt
ons will
fl
ash 5
ti
mes to indicate the device
has been reset.
Momentary Switch Programming
- Push C1 and C2 together for 5 seconds to ender Momentary Switch Programming
mode. L1 and L10 will be on steady to indicate you are in programming mode for the
momentary switch.
- Hold the bu
tt
on you desire to program for 3 seconds to set it as a Momentary Switch.
The Red LED backlight will
fl
ash three
ti
mes to indicate it has been set as a momentary
bu
tt
on.
- Hold for another 3 seconds to reverse the se
tti
ng. The Red LED Backlight will
fl
ash once
to indicate it has been set as an ON/OFF switch.
- Push C1 and C2 together for 5 seconds to exit the programming mode.
Function
To set button as momentary switch
L7
L6
LED Display Func
ti
on Disabled
Warning / Traffic Light Flash Pattern Indicator: Only Available with ON / OFF Buttons
Display Arrow From Right To Le
ft
Display Warning Light All Flash
Display Middle Towards Outward
L10
L9
L8
Display Arrow from Le
ft
To Right
Function
To enable LED indicator feature for warning / traffic light function
Press C1 and C3 together for 5 seconds to enter Warning/Tra
ffi
c Light Display
Programming mode. L2 and L9 will show solid to indicate you are now in the
programming mode.
- By pressing the bu
tt
on, LED L6 to L10 will indicate which light indicator func
ti
on has
been selected.
- A
ft
er Programming, press C1 and C3 together for 5 seconds to exit the programming
mode.
- 2 -
