Before connection
7
How to avoid damages
Do not under any circumstances connect or disconnect equip-
ment when power is turned on. The design of the RCA plug
generates a huge transient when inserted. Connecting or dis-
connecting equipment with the power on can result in severe
damage to both speaker and amplifi er.
How to avoid noise problems
The V1.0 contains delicate circuits that are sensitive to mag-
netic strayfi elds. The unit should not be placed near mains
transformers, TV sets etc. Care should be taken regarding
placement of the interconnect cables. Do not run interconnect
cables in parallel with mains cords or speaker cables. Keep
interconnect and speaker cables as short as possible.
How to avoid antenna problems
In some set-ups hum may occur when you connect the radio,
VCR or TV to your system. The problem is caused by DC
voltage coming from your antenna. Please contact your cable
network operator.
How to remove and un secure transport necessitis
Remove the wing bolt located underneath the product.
!Important!
Keep the wing bolt in a safe place for future use. Always
tighten the wing bolt when moving the CD player. If not
securely fastened, the CD player will be severely damaged,
resulting in void of warranty. Do not over-tighten the wing
bolt.
REMOVE
A B R
A H M S
E N
