background image

Important Safety Information

6

The FS models are tall, slim and heavy. Installed on a flat

smooth surface in the manner described below, they should

provide a safe living environment in which to listen to them.

However, if you have uneven floors in your home, special at-

tention to installation and adjustment are necessary to assure 

stability of the FS models. Please be advised that the speakers 

may tip and fall if pushed.

Trailing cables are a significant trip hazard. Cables should be 

tidy and secured. When stripping cables tools designed for the 

purpose should be used. Tools shall be chosen and adjusted 

to the size of wire and insulation to be stripped. Loudspeakers 

should never be connected directly to the electricity supply.

General care

The loudspeakers are designed for a normal domestic

environment. Large changes in temperature, high humidity, 

and/or  direct  sunlight  should  be  avoided.  General  cleaning 

of the loudspeakers requires only the removal of dust with a 

microfiber cloth. The use of spirit based cleaners should be 

avoided. If in doubt please request advice from your dealer.

.

Summary of Contents for FS401















Reviews: