6
Step 4:
For this step solder the potentiometer and diode as indicated in the picture
below. Make sure the direction of the diode is same as per the PCB.
Note: the silver coting of the diode is the n-side i.e. point your silver side
towards the arrow symbol of the diode as shown in figure.
Step 5:
Now the most important thing to do is solder the headers.
These are very sensitive as the orientation to the breadboard may disturb.
Follow the tips shown in below.
First place all the headers on the breadboard, then place the PCB upon it
and solder.
• Place headers to the breadboard as shown.
• Place slowly the PCB on the headers.
• Make sure all the headers are inserted
•
Solder it as shown in figure.
Summary of Contents for AK-252
Page 10: ...9 Schematic Board Layout...
