7 PIN PHOTOCONTROL ORIENTATION
The orientation need to be done if the indicator arrow
doesn’t points north.
1.
Loosen the two screws.
2.
Rotate the center of the receptacle with a screw driver
until the indicator arrow points north.
3. Retighten the two screws.
4.
Match the Pins with correct sockets and insert the
photoelectric control ( not included) or shorting cap in
receptacle.
5.
Twist the photoelectric control (not included)
clockwise into locking position.
Face to North
Add:
1501 Industrial Way N, Toms River, NJ 08755
Phone:
866-222-8866
E-mail:
Web:
www.AboveAllLighting.com ©2016 ABOVE ALL Lighting, Inc. All rights reserved
THE ACORN LED POST TOP (VPTA)
Instructions Manual
2
POLE MOUNT
1.
Remove the Decorative Final and Gasket A
and keep them for use later.
2.
Screw the Rod in the luminaire together with
the Adapter and Gasket B.
3.
Put the Acorn Shade on the luminare and
secure the Decorative Final. Make sure the
Gasket A is between the shade and final.
4.
Make wire connection with supplied wire
nuts and make waterproof treatment by
others in a tenon or pole per “Electrical
Connections”
5.
Slip the fixture onto a tenon or pole with
diameter of 2 3/8’’ and rotate the fixture to
desired orientation.
6.
Tighten all set screws (6).
Set Screw
Pole
ø
2
3/8”
Decorative Finial
Acorn Shade
Luminaire
Gasket A
Rod
Adapter
Gasket B
Set Screw
WARNING
1. Risk of injury or damage. Make certain power is OFF before installing or maintaining
fixture.
2.
If fixture is furnished with photocell receptacle, install the photocell or shorting cap.
Ref#:14308-10923
L
N
BLACK:L
WHITE:N
GREEN:GND
