Abov MC96FR116C Series, User Manual

Page: 30 / 196

MC96FR116C
30 November, 2018 Rev.1.8
7. ELECTRICAL CHARACTERISTICS
Unless otherwise noted, VDD = V
BODR
~ 3.6V,
TA=-20~+70
℃
.
7.1 Absolute Maximum Ratings
Parameter Symbol Rating Unit
Supply Voltage
VDD -0.3~+4.0 V
VDD_IR -0.3~+5.0 V
VSS -0.3~+0.3 V
Normal Voltage Pin
VI -0.3~VDD+0.3 V
VO -0.3~VDD+0.3 V
∑ I
PIN
50 mA
Total Power Dissipation
PT
VDD
240 mW
PT
VDD_IR
2500 mW
Storage Temperature TSTG -45~+125
℃
Table 7-1 Absolute Maximum Ratings
NOTE
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at any other conditions beyond those
indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
7.2 RECOMMENDED OPERATING CONDITION
Parameter Symbol Condition MIN TYP MAX Unit
Supply Voltage
VDD
NOTE
V
BODR
- 3.6 V
VDD_IR V
BODR
- 3.6 V
Operating Temperature T
OPR
-20 - 70
℃
Operating Frequency F
OPR
DC - 12 MHz
Table 7-2 Recommended Operating Condition
NOTE
The minimum voltage of FLASH write is 1.55V. If FLASH is written, must be checked with V
BODI0
.
7.3 POWER SEQUENCE CHARACTERISTICS
Parameter Symbol Condition MIN TYP MAX Unit
Time interval from VDD-on to
VDD_IR-on
tPWRUP - 0 - - ns
Time interval from VDD_IR-
off to VDD
–off
tPWRDOWN - 0 - - ns
Table 7-3 Power Sequence Characteristics
NOTE
Refer to the timing diagram of
“12.8 Power Sequence”