Smoke Detector GUI user guide
3. How to use Smoke Detector GUI Program
9
3
How to use Smoke Detector GUI Program
3.1
Power connection and initial settings
Once the program is installed and H/W setup is completed, the Smoke Detector GUI Program can be
started by following the procedure below:
1.
Connect the Smoke Detector Host with the Slave Board.
2.
Connect the power of the Smoke Detector Host to the 24V adapter that we provided. If the
output voltage of the adapter is required to be between 12V and 24V, a normal adapter can
be used too.
3.
When the power is successfully connected, users can see the messages shown below.
“
TOOL NOT CONNECTED!!
”
“C
LICK CONNECT BUTTON
”
4.
Using a USB cable, connect the Smoke Detector Host to the PC where the Smoke Detector
GUI Program is installed.
5.
Start the Smoke Detector GUI Program on the PC. When the Program starts, users can see
the dialog box as shown in Figure 4.
Figure 4. Program Screen
