3. OCD debugger (96 series)
8-bit MCU starter kit guide
8
3
OCD debugger (96 series)
3.1
Building and running LED_Blinky project (example A96G140)
Running application code (LED_Blinky) makes it easier to start the Starter Kit. When following the steps
below, LEDs on the board turn on and off:
Step 1.
Prepare the Starter kit Board
Step 2.
Set up the Starter kit Board
Step 3.
Connect the Starter kit to your PC
Step 4.
Run the LED_Blinky Project
Step 5.
Compiling LED_Blinky
Step 6.
Download LED_Blinky
Step 7.
Debugging LED_Blinky
Step 8.
Check the LED_Blinky Operation