EN
7
Zen Combination Sauna 2 Person comes in
7 boxes. Make sure all parts are included
before commencing assembly.
1. Positioning back board. Place the
back board in the desired location of
your sauna. Make sure which side is
front and which side is back.
2. Assembling back board. Slot the back
board into the grooves at the rear of
the floor board. Make sure they are on
the same line. One person should hold
the back board in place while another
person does the next step. Put the wires
of back board into the cabinet to avoid
pressing the wires during installation.
3. Assembling left board. Align
corresponding battens of the back and
left board, make sure the protruding
batten joins to the flute, and secure
together using 3 screws with an electric
screw driver.
4. Assembling right board. Align the
corresponding battens of the back and
right board, make sure the protruding
batten aim to the flute, and secure
together using 3 screws with an electric
screw driver.
Installing your Zen Combination Sauna
