Pairing the Siren with the Gateway
When adding the siren to your gateway, you will need to use the abode web app. Log into your account at
www.my.goabode.com
and follow the three steps below.
Then click on Other Devices. This will open the paring
screen and the gateway is ready for you to add the
Siren device.
Click on Add device
1
2
3
A. Plug the Indoor Siren into a power outlet, the Siren will emit 2 short beeps, and the LED will flash twice
to indicate it is now in normal operation mode.
B. Press and hold the function button for 10 seconds until the LED begins to flash and the Siren will send
the pairing signal to the gateway. If the Indoor Siren successfully pairs with the gateway, the siren
device will show up in the Add Device list, and the siren will beep 2 times to confirm it is communicating
with the gateway. Complete the process by adding the device and name the siren.
Siren device will be listed, when gateway recognizes it.
Use a descriptive name such as , Siren in hall way etc.
After paring the siren with the gateway, check the web app device list to insure the siren has been included. If
siren did not pair with gateway , unplug the siren from the wall, and press the function button twice, then plug in
back into the wall, and repeat steps 1 though 3.
Follow the steps below to pair the Indoor Siren with the gateway.
2
abode Systems Inc. Visit our support page for more information
http://support.goabode.com/
2016
abode reserves the right to update this product information at any time without notice.
