15
Using your steam cleaner
Operating the steam cleaner
Before you plug the appliance in, check the water tank is full.
If it is not, refer to page 8.
Plug the mains plug into a socket and switch the cleaner on
by turning the steam dial clockwise between MIN/MAX.
The red power indicator light will illuminate to indicate the
unit is powered and heating.
If the light does not illuminate, refer to page 19.
Note:
•
A full water tank should provide approximately 15-25 minutes of use.
•
Steam time can vary according to volume and temperature of water in the
tank.
•
There be an initial few drops of water ejected.
•
The desired steam intensity depends on the specific task, refer to page 17
for further details.
The steam cleaner should take approximately 30 seconds to
heat up to steam temperature.
The steam cleaner is now ready to use.
Hold down the steam button to release the steam.
Summary of Contents for pro A21SM3001
Page 27: ...Model number A21SM3001 R3a...
